Lx-M BNC inductive probe
Lx-M BNC inductive probe allows you to capture a secondary Coil-On-Plug ignition system waveforms from the secondary circuit of shielded coils of individual ignition systems, Coil-On-Plug (COP), as well as from DIS-ignition coils mounted directly above the spark plugs and comes with a BNC connector for use with any oscilloscope.
The probe mounts directly onto the ignition coil, allowing measurement of secondary voltage parameters. It operates by coupling with the ignition coil’s magnetic field, enabling an oscilloscope to display the secondary voltage waveform without making a direct electrical connection to the coil.
Lx-M universal inductive probe is used to get voltage waveforms from the secondary circuit of shielded coils of individual ignition systems, as well as from DIS-ignition coils mounted directly above the spark plugs.
Lx-M universal inductive probe is used to test COP ignition systems equipped with rod-type ignition coils.
Lx-M probe equipped with the BNC connector can be used together with most BNC oscilloscopes.
Lx-M probe converts the inductive signal caused by the high voltage circuit of the ignition coil into a voltage pulse that is then displayed on the oscilloscope screen.
Due to the variety of ignition coils with different designs, it should be noted that the Lx-M probe cannot determine the exact voltage at which the ignition spark occurs, but it can be used for comparative analysis between different cylinders to determine which cylinder is not working properly.
The length of the Lx-M universal inductive probe cable is 1.8 m.
Precautions before use:
Keep wires and adapters away from moving and rotating parts.
Keep wires and adapters away from the exhaust manifold.
Video
Reviews
There are no reviews yet.